Nickel Alloys and Special Stainless Steels

James Alloys can now offer from stock and on a forward lead time on a full range of Nickel alloys in sheet, plate, pipe, tube, bar, fittings and flanges in an extensive range.

Stock Materials

Sheet/Plate

From 0.5mm (0.02") up to 50mm (2") thickness in sizes up to 8000mm (26') x 2500mm (8'). We have access to Europe's largest stock of 6000mm (20') x 2500mm (8') plate in thicknesses from 3mm.

Pipe/Tube

Seamless and welded pipe from 1/4"nb Sch 40 up to 8"nb Sch 40 and tube from 1/4"od x 16 swg to 4"od x 3/16 wt from stock. U bend packages and smaller or larger tube sizes can be manufactured at short notice.

Bar

Round up to 8" diameter.

Fittings

A full range of butt weld, screwed and socket weld pipe fittings, including tees, reducers, bends and elbows, in sizes designed to complement the pipe stock.

Flanges

Fully forged and machined weld neck, slip-on and blind flanges, in sizes designed to complement the pipe stock. Specials can be manufactured at short notice.

Stock Grades/Specifications

Material	UNS	ASTM/ASME	BS	Werkstoff
Alloy 200	N0220	B160,B161,B162,B163	3072-6 NA11	2.4066
Alloy 201	N0221	B160,B161,B162,B163	3072-6 NA12	2.4068
Alloy 400	N04400	B127,B163,B164,B165	3072-6 NA13	2.4360
Alloy k-500	N05500		3072-6 NA18	2.4375
Alloy 600	N06600	B163,B166,B167,B168	3072-6 NA14	2.4816
Alloy 601	N06601	B163,B166,B167,B168		2.4851
Alloy 625	N06625	B443,B444,B446	3072-6 NA21	2.4856
Alloy 800H	N08810	B163,B407,B408,B409	3072-6 NA15	1.4958
Alloy 800HT	N08811	B163,B407,B408,B409	3072-6 NA15	1.4959
Alloy 825	N08825	B163,B423,B424,B425	3072-6 NA16	2.4858
Alloy C-276	N10276	B574,B575,B619,B622		2.4819
Alloy C-22	N06022	B574,B575,B619,B622		2.4602
Alloy 330	N08330	B535,B536		1.4862/4
Alloy 75	N06075			2.4951
Stainless 310S	S31008	A312,A240,A269,A276	970,1449,1501	1.4845

Fabrication

In addition we can also offer a full processing service, we have extensive capacity for close tolerance processing of sheet,plate,pipe,tube and bar.

Plasma

Our plasma cutting facility can process plate from 1.6mm up to 50mm thick. It is capable of high quality, close tolerance cutting and profiling.

Shear

The DNC controlled shears will accommodate sheet and plate up to 4m wide in thickness up to 12mm and produce close tolerance, high quality cut edges.

Saw

Large capacity for cutting and sawing pipe, tube and bar ensures fast turnaround of material. By using the latest cutting techniques and equipment, we can guarantee clean cut, close tolerance cutting to length and size.

Waterjet

A waterjet machining capacity is available to produce intricate shapes at near net sizes with no heat affected zone. Before, during and after processing through final inspection, packing and despatch, all materials maintain full traceability.

See Our Products